Bluetake i-PHONO PLUS BT430Tx Bluetooth Stereo Domgle

Specification

UNIT

Dimensions: 51x52x15 mm (Stereo Plug Excluded)
Weight: 36g (Battery Included)
Built-in Stereo Plug: Ø 3.5 mm (1/8 in) (Diameter)

SOUND

Frequency Response: 20 Hz – 20 KHz
Sample Rate: 48 KHz, 16 Bit
Input Impedance: 30 KΩ @ 0 dB gain
Line-level Input: 1 Vrms @ 0 dBFS (Full Scale)

BLUETOOTH

Specification: Bluetooth v1.2 compliant
Bluetooth Profile Supported: 48 KHz, 16 Bit
Input Impedance: A2DP (Advanced Audio Distribution Profile)
Fixed PIN Code: 0000 (a sequence of four zeros)
Connection: Point-to-Point
Audio Codec: SBC

RADIO

Carrier Frequency: 2.4 - 2.483 GHz
Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum)
Modulation Method: GFSK (Gaussian Frequency Shift Keying)
Radio Coverage: Class 2, up to 5–10 m (15–30 ft) in open field
(The actual range depends on the paired Bluetooth device, battery power, and environmental factors: orientation of devices relative to each other, obstructions, enclosures, radio frequency noise, and interference.)
Antenna: Embedded Patch Antenna
Sensitivity: < 0.1% BER @ -80 dBm
RF Output Power: -6 to 4 dBm

POWER

Power Consumption: 190 mW
Power Input: 5 V / 200 mA
(Use only the original the USB power cable included in the retail box to charge the dongle.)
Built-in Battery: 3.7 V / 550 mAh / Li-Polymer / Rechargeable

OPERATION

Operating Time: approx. 7 hours
(The actual operating time depends on the usage frequency and environmental factors. The long distance wireless connection will increase the power consumption.)
Operating Temperature: -10°C ~ +60°C
Storage Temperature: -20°C ~ +70°C